Lots of 15mm scenic stuff

I've not posted anything for a few weeks, but I have been busy, mostly making and painting a lot of scenic stuff for 15mm games. Here are the results. Firstly a bridge and river sections to create a crossing point.

The bridge is resin. I bought it ages ago, at Colours, I think from The Square. It has sat around in a box under my desk for a few years but I decided that it was high time I painted it so it can become useful. The river sections are made from corrugated cardboard with taped edges and just textured and painted. There are more sections to make up a decent length of river;

On these final two sections, you can definitely tell what they are made from! Still, they will do the job on the table.

In total I have roughly 1.5m of river. It isn't perfect, but it was cheap to make and is a lot wider than most wargaming river sections you can buy.

I've also been working on terrain that is going to give me some marshy ground. There is a decidedly wet and dodgy piece and some straggly trees growing on boggy ground.

The trees are railway accessories that I picked up cheap at the club's Tabletop Sale last year and I have loads more left. The bases are once again card, tape and texturing. I'm pretty pleased with these.

Finally, I made a load of road sections, representing rural dirt tracks. I made loads of these about seven or eight years ago, but they appear to have vanished, so I've had to make more. They are cork floor tiles cut into 5cm wide strips and coated with PVA glue and railway modelling ballast. In total there is over 3.5 m of roads. If I ever find the ones I made before, that would give me another 2.4 m of roads/tracks.

All of this stuff is going to be great for Sharp Practice and Chain of Command in 15mm, but only time will tell how robust the cardboard-based stuff is!

I doubt that the bridge would be able to take the weight of armour, but it'll work fine for infantry and light vehicles.